September APsystems Installer Training Webinars

/in , , , /by

APsystems will be conducting PART 1 of its system installation training on Tuesday, September 28 at 9am PST/12pm EST covering microinverter installation for its current models. PART 2 will take place on Thursday, September 30, at 9am PST/12pm EST and cover ECU set up and EMA walkthrough. This training is at no cost to installers.

PART 1: QS1, YC600 and YC1000 microinverter installation
Attendees will learn the ins and outs of QS1, YC600 and YC1000 microinverters, as well as tips and tricks to streamline their installation. Learn the features and benefits of using APsystems products including installation by a single crew member, reduced overall system cost, faster installation time, fewer SKUs and stocking costs, built-in rapid shutdown compliance, and higher energy harvest over conventional inverters.

PART 2: ECU set up and commissioning, and EMA walkthrough
Our team will take you through the simple and convenient set up of the ECU-R gateway and use of the ECU App. We will then walk you through final step in the EMA web portal and how to navigate those helpful features.

REGISTER HERE

APsystems Installer Training Webinars – April 2021

/in , , , /by

APsystems will be conducting PART 1 of its system installation training on Tuesday, April 20th at 9am PST/12pm EST covering microinverter installation for its current models. PART 2 will take place on Wednesday, April 21st, at 9am PST/12pm EST and cover ECU set up and EMA walkthrough. This training is at no cost to installers.

PART 1: QS1, YC600 and YC1000 microinverter installation
Attendees will learn the ins and outs of QS1, YC600 and YC1000 microinverters, as well as tips and tricks to streamline their installation. Learn the features and benefits of using APsystems products including installation by a single crew member, reduced overall system cost, faster installation time, fewer SKUs and stocking costs, built-in rapid shutdown compliance, and higher energy harvest over conventional inverters.

PART 2: ECU set up and commissioning, and EMA walkthrough
Our team will take you through the simple and convenient set up of the ECU-R gateway and use of the ECU App. We will then walk you through final step in the EMA web portal and how to navigate those helpful features.

REGISTER HERE

WEBINAR: Using Microinverters in Commercial Projects

/in , /by

Next Thursday, April 30th, APsystems is hosting a webinar on using microinverters in a commercial environment. This webinar will cover the benefits and how-to for APsystems microinverter offering and why they are a great option for commercial solar projects.

Attendees to this webinar will learn:

  • Learn best practices for installing multi-module microinverters on commercial rooftops
  • Understand the significant benefits of microinverters in commercial applications
  • Hear what it takes to design a commercial system with microinverters, including 3-phase applications
  • Discuss real-life applications and examples
  • Understand the communication and remote monitoring advantages of using microinverters

Chris Barrett, senior director of technical support, will go into detail on the installation of APsystems microinverters in commercial applications as well as outline the benefits regarding safety, rapid shutdown compliance, system monitoring, higher energy harvest, reliability, system expansion and a variety of other reasons behind the popularity of its microinverters in the commercial MLPE marketplace.

Join us for next Thursday at 10:00 AM PST / 1:00 PM EST and check out our webinar page  to see all the other helpful webinars was have available.

WEBINAR: 10 Critical Things Every Solar Installer Should be Doing Right Now

/in , /by

Join APsystems for this special event webinar just for solar installers. This webinar is intended to be a helpful checklist of the key things all solar installers should be doing during the COVID Crisis to both weather the current challenges and to prepare for what happens next. The webinar will include everything from training to tools, careers and credits as well as cover the government assistance programs for small businesses like those of many solar installers.

Join us next Tuesday at 10:00 AM PST / 1:00 PM EST for this helpful and timely webinar. You can learn more about this and other APsystems webinar events on our webinar page.

APsystems webinar series helps installers reduce costs

/in , /by

Looking to save cost on every solar installation? APsystems’ solar solution is 10-20% less expensive than conventional microinverters and can be installed by a single crew member!

Join APsystems for it’s helpful and timely new webinar series providing the basics on the APsystems platform, what sets it apart from competing systems, tip in tricks on how to streamline your installation, and best of all, how to save money using APsystems products.

The webinar series takes place in April, beginning with the first two webinars—a two-part series on APsystems microinverter installation, ECU set up and an EMA walkthrough. The first webinar, PART 1: QS1, YC600 and YC1000 microinverter installation with time and cost-saving tips, will take place on Tuesday, April 14th and Wednesday, April 15th at 1pm PST/4pm EST. The second webinar, PART 2: ECU set up and commissioning with EMA walkthrough. will take place on Thursday, April 16th at 10am PST/1pm EST.

Plus 3 lucky winners from each webinar will win a free ECU gateway from APsystems! Join us to learn how APsystems can save you time and money and look for our additional webinars to be announced for April. We look forward to seeing you online!

PART 1 REGISTER HERE
PART 2 REGISTER HERE

Attendees will also receive 1 NABCEP CE credit for each APsystems webinar they attend. Be sure to sign up for both events of this 2-part series!

Join APsystems on our Training Tour & Happy Hour – First stop: Calgary, May 7th!

/in , /by

APsystems will be hosting a training tour for its Canadian solar installers and the first location is Calgary on May 7th. The 3-hour FREE training will be followed by a Happy Hour, so join APsystems for training on our latest products and a few drinks on us!

Training will provided by APsystems’ senior technical engineers and will cover the new QS1 and YC600 system design, a case demonstration and introduction to the ECU-R and EMA apps. Don’t miss this opportunity to learn how to simplify PV system installation and save money with the YC600 and QS1!

We’re also giving a prize away during Happy Hour! Be sure to wear your APsystems swag (hat, t-shirt, or anything related to APsystems colors, logos, etc—use your imagination!). Whoever shows the most APsystems spirit will be our grand prize winner!

To attend the training and Happy Hour, please fill out the form to register. Be aware the final day to register is May 6.

This event is being held right before Solar Canada 2019, and we’re just warming up for a fantastic show. Be sure to also stop by and see us at Solar Canada 2019!

Date: May 7th, 2019
Times: 2:00 p.m. – 5:00 p.m. (Training)   6:00 p.m. – 8:00 p.m. (Happy Hour)
Location: Hilton Garden Inn, Downtown Calgary
Address: 711 4th St. SE, AB T2G-1N3 Calgary

APsystems Launches QS1 Four-Module 1200W AC Microinverter

/in , , /by

**FOR IMMEDIATE RELEASE**

ANAHEIM, USA – September 24th, 2018 – APsystems unveils the QS1, a four-module, single phase microinverter for residential applications at the Solar Power International trade show in Anaheim, USA. A new design for APsystems, the QS1 offers 75% faster installation time, while offering the highest peak output power and up to 3X faster data transmission speed than PLC. A wider MPPT voltage range will result in a greater energy harvest for homeowners.

The first of its kind, the QS1 is designed to accommodate today’s high output PV panels up to 375W, offering 300W AC output per channel, the highest among microinverters. The unit also significantly reduces installation time and costs, taking the place of four conventional microinverters per each QS1 installed while still providing four independent MPPT.

The QS1 utilizes a common AC trunk cabling with the dual-module YC600, offering flexible mix-and-match compatibility on the same circuit to enhance site design capability and maximize circuit capacity. Both microinverters also utilize the same gateways; installers can choose from the ECU-R, for single or multi-residential installations, or the ECU-C, for applications requiring consumption monitoring and advanced contact/relay features.

“Compatibility with the existing YC600 microinverter system gives the QS1 an unprecedented advantage,” said APsystems Chief Technology Officer Dr. Yuhao Luo. “Mixing dual and quad microinverters in the same system adds design flexibility while offering a strong inventory and installation labor advantage over conventional microinverters.”

Today’s solar systems require a more robust communication architecture to manage significantly more data points and in-field software updates. A 2.4GHz wireless Zigbee mesh network offers enhanced data transmissions speed, up to three times faster than conventional powerline communication (PLC).

The QS1 builds on the successful APsystems line of multi-module microinverters, offering reduced logistics costs, integrated communication and connection features, and a wider MPPT voltage range for greater energy harvest during low light conditions.

The new microinverter will be on display at the APsystems booth #2838 at Solar Power International, USA.

APsystems to Launch QS1 Four-Module 1200W Microinverter at Solar Power International, USA

/in , , /by

FOR IMMEDIATE RELEASE

SEATTLE, Wa.; ROTTERDAM, Netherlands; JIAXING, China – August 27, 2018 – APsystems will unveil the QS1, a four-module, single phase microinverter for residential applications at the Solar Power International trade show in Anaheim, CA. A new design for APsystems, the QS1 offers 75% faster installation time, while offering the highest peak output power and up to 3X faster transmission speed than conventional microinverters. A wider MPPT voltage range will result in a greater energy harvest for homeowners.

The first of its kind, the QS1 is designed to accommodate today’s high output PV panels, offer enhanced capability and significantly reduce installation time and costs while providing an unprecedented level of power with four independent MPPT per channel. Common AC trunk cabling with the dual-module YC600, offers flexible mix-and-match compatibility on the same circuit and with the same gateway (ECU-R or ECU-C).

The unit also builds on the successful APsystems line of multi-module microinverters, offering reduced logistics costs and integrated communication and connection features.

The new microinverter will debut at the APsystems booth #2838 September 25-27 at SPI, USA.

APsystems Congratulates “Best Installers in Canada” Winners Awarded at Solar Canada 2018

/in , , /by

APsystems congratulates the winners of its “Best Installers in Canada” award held at Solar Canada 2018 June 20-21, the country’s largest PV convention where APsystems also exhibited its latest groundbreaking microinverter and MLPE technology.

APsystems was also proud to honor our Canadian solar partners with the “Diamond Distributor” and “Golden Distributor” awards at the show. Polaron Solartech was honored as “APsystems Diamond Distributor”, and National Solar Distributors and HES PV were honored as “APsystems Golden Distributor.” Their efforts have helped make APsystems a global leader in solar and we are proud to partner with them to offer outstanding solar solutions to customers throughout Canada.

APsystems also extends a heartfelt thanks to all who visited our fantastic distributors’ booths during the event. It was a very successful exhibition and an ideal platform for PV companies to share their solutions and ideas.

To contact any of our great partners in Canada, simply visit: https://canada.apsystems.com/home/partners/

Join APsystems at Solar Canada 2018!

/in , , /by

APsystems to award winners of the “Best Installers in Canada” contest.

APsystems, a global leader in solar microinverter and MLPE technology, will be exhibiting at Solar Canada, the country’s largest PV convention, in Calgary June 20-21. Come by and check out the latest and greatest APsystems products at any one of our five fantastic distribution partners who will be there in force.

APsystems’ “Best Installers in Canada” contest was launched in May and has since received a great deal of interest and attention. To discover who has been nominated and chosen to receive the “Best Installers in Canada” award, all are invited to join us in congratulating the winners at an award ceremony on June 21st from 9:30-10:00 a.m. at the Solar Canada show.

Date: 20-21 June
Venue: BMO Centre, Calgary, Alberta, Treaty 7 Territory

APsystems’ Distributors:
Polaron Solar: Booth #513
National Solar Distributors: Booth #111
HES PV: Booth #519
Amray: Booth #619
Frankensolar: Booth #323

We look forward to seeing you all at Solar Canada 2018!