The Power of Quad Microinverters for Commercial Rooftops

/in ,

As part of Solar Power World’s 2023 Trends in Solar series, an article was recently published entitled, “Mightier microinverters can power 4 solar panels,” that highlights APsystems as the forerunner in making a four-in-one (quad) microinverter as early as 2014. In addition, the article features Jason Higginson, senior marketing director of APsystems, providing information on why microinverters are now ideal for commercial solar applications due to the quad design. In particular, quad microinverters reduce cost, speed up installation and produce more energy over the life of the system.

Click here to read the full article

QT2 Now Shipping!

/in

The new QT2, a 3-Phase microinverter for C&I applications, connects to up to 4 PV modules, is rapid shutdown and UL 1741 SA (CA Rule 21) compliant and comes in 1728W (208V) and 1800W (480V) output models.

Why microinverters in commercial solar? As featured in the recent Solar Builder article “Making the case for microinverters in C&I solar,” QT2 microinverters offer built-in rapid shutdown, pairing with higher capacity PV modules, improved performance over string inverters under a variety of conditions, fewer potential points of failure, plug-and-play three-phase wiring, and are more cost-effective than ever.

A new cooling topology allows the QT2 to reach unprecedented levels of high efficiency power conversion, while embedded 2.4GHz ZigBee wireless communication provides high speed data transfer of production data. Solar installers can now offer their C&I customers all the benefits of MLPE in an easy-to-install, plug-and-play, native 3-Phase microinverter package.

Free Training Webinars for Professional Solar Installers

/in , ,

Attention Professional Solar Installers: APsystems is offering free webinar trainings for you in the month of February & March*. Learn everything you need to know about our product lines, installation, setup, benefits and features, customer accounts, site configuration and troubleshooting on both DS3 & QT2.

Whether you are attending training for DS3 or QT2, there will be 2 webinars for each: Part 1 on Microinverter Installation, and Part 2 on ECU Gateway Setup & Commissioning + EMA walkthrough. Each webinar is 1-hour long, and Parts 1 & 2 take place on consecutive days. It is important that installers attend both parts for complete system training. Tips and tricks for rapid installation as well as maximizing reliability and power production will be covered.

Learn more and register for training here.

FEBRUARY DATES: Feb 21/22
*If February doesn’t work for you, these training webinars will take place again in March as well.